Table of Contents
Advertisement
Installation
Instructions
A_ OUTSIDE TOP EXHAUST (Vertical Duct)
INSTALLATION
OVERVIEW
A1. Attach
Mounting
Plate to Wall
A2. Prepare
Top Cabinet
A3. Check Damper
Operation
A4. Mount Microwave
Oven
A5. Adjust
Exhaust
Adaptor
A6. Connect
Ductwork
|
AI.__. ATTACH THE MOUNTING
PLATE
TO THE WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach
the plate to a wall stud.
1, Remove
the toggle wings from the bolts.
2, Insert the bolts into the mounting
plate through
the
holes designated
to go into drywall and reattach
the toggle wings to %" onto each bolt.
To use toggle bolts:
Spacing for Toggles More
=ThanWall Thickness
i Toggle Wings
Mounting
Plate
_t_
Wall
,,,J
Bolt End
3, Place the mounting
plate against the wall and
insert the toggle wings into the holes in the wall to
mount the plate.
NOTE:
Before tightening
toggle bolts and wood
screw, make sure the tabs on the mounting
plate
touch the bottom
of the cabinet when pushed
flush
against the wall and that the plate is properly
centered
under the cabinet.
CAUTION:
Be careful to avoid pinching
fingers
between
the back of the mounting
plate and the wall.
4, Tighten
all bolts. Pull the plate away from the wall
to help tighten the bolts.
12
Advertisement
Table of Contents
