Air Distribution; Temperature - SMART fortwo coupe Operator's Manual

Heating
G
Warning!
Follow the recommended settings for
heating and cooling given on the following
pages. Otherwise the windows could fog
up, impairing visibility and endangering
you and others.
Switching heating on/off
> Switching on: Make sure that the key in the
starter switch is turned to position 1.
4
> Push temperature control up.
> Switching off: Push temperature control
fully down.
148
>> Controls.
Setting the temperature
i
You should raise or lower the temperature
setting in small increments.
> Increasing or decreasing: Push tempera
4
ture control up or down.
Rapid cooling
> Push air volume control 1 fully up.
> Turn air distribution control
position a.
4
> Push temperature control
> Adjust the air vents as desired.
Rapid heating
1
> Push air volume control to level 3.
4
> Turn air distribution control
tion between P and Y.
> Push temperature control 4
> Adjust the air vents towards the occupants.
Adjusting air distribution
You can adjust the air distribution using air
distribution control
The following symbols are found on the air
distribution control:
Symbol Function
3
to
P
Directs air to the windshield
and side windows
fully down.
Y
Directs air to the footwells and
air distribution is reduced at
the center and side air vents
3 to a posi
a
Directs air through the center
and side air vents
fully up.
3 .