Windshield Wipers - SMART fortwo coupe Operator's Manual

Windshield wipers

!
Vehicles with rain light sensor*:
If you have set intermittent wiping, dirt on the
surface of the sensor or optical effects may
cause the windshield wipers to wipe in an
undesired fashion. This could then damage the
windshield wiper blades or scratch the wind
shield. You should therefore switch off the
windshield wipers when weather conditions
are dry.
> Make sure that the key in the starter switch
is turned to position 1.
> Activating intermittent wiping: Turn the
1
wiper switch to position .
After the initial wipe, pauses between wipes
are automatically controlled depending on the
vehicle speed and by the rain light sensor*.
> Deactivating intermittent wiping: Turn the
wiper switch to position 0 .
110
>> Controls.
Wiping with windshield washer
fluid
P54.25 5361 31
Wiper switch
1 Wiping with windshield washer fluid
> Pull the wiper switch in the direction of
arrow 1 and hold in position.
The windshield wipers operate with wind
shield washer fluid.
> Release the wiper switch.
The windshield wipers will wipe three more
times.
i
To prevent smears on the windshield, or
noisy/chattering wiper blades, wipe with
windshield washer fluid periodically even
when it is raining.
Single wipe
> Pull the wiper switch briefly in the direction
of arrow 1 .
The windshield wipers wipe on time with
windshield washer fluid.