Connection Diagram; Box Contents; Ground Rules - Numark Pro SMX Quick Start Manual

Professional 2-channel mixer with effects loop
Hide thumbs Also See for Pro SMX:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
INTRODUCTION
Welcome to the PRO SMX, a professional 2-channel mixer. Here are just a few features that you'll come to love
about this device:
Fully analog audio signal path
Pre-/post-effects send and return jacks allow you to use external effects processors
3 inputs per channel (line, phono, and balanced ¼"), all gold-plated
RCA and balanced XLR master outputs
RCA AUX IN ("session input") with volume control
3-band EQ for each channel with button to switch between ±12dB or +12/–∞dB (i.e. the EQ knobs can be used
traditionally or as frequency kills)
Mini-crossfader cueing
Smooth Pro-X-fade crossfader with adjustable end points and torque
Reverse switches and continuous rotary slope control for crossfader and line faders
We hope that the PRO SMX serves you well for many years to come.
Sincerely,
The People of Numark

BOX CONTENTS

PRO SMX
DC Power Adapter
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your PRO SMX. Registering your product ensures that we can keep
you up-to-date with any last-minute product developments and provide you with world-class technical support, should
you run into any problems.

GROUND RULES

1.
Make sure all items listed in the BOX CONTENTS section are included in the box.
2.
READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3.
Study the connection diagram in this guide.
4.
Place mixer in an appropriate position for operation.
5.
Make sure all devices are turned off and all faders and gain knobs are set to "zero"
6.
Connect all stereo input sources as indicated in the diagram.
7.
Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8.
Plug all devices into AC power.
9.
Switch everything on in the following order.
Audio input sources (i.e. turntables, CD players, etc.)
Mixer
Last, any amplifiers or output devices
10.
When turning off, always reverse this operation by,
Turning off amplifiers
Mixer
Last, any input devices
1

Advertisement

Table of Contents
loading

Table of Contents