Memory Configurations: Small Form Factor And Convertible Minitower - HP Compaq 8000 Elite Series Quickspecs

QuickSpecs
Standard Features and Configurable Components (availability may vary by country)

Memory Configurations: Small Form Factor and Convertible Minitower

Maximum Memory*
Total Memory
1 GB
2 GB
(dual channel symmetric)
4 GB
(dual channel symmetric)
8 GB
(dual channel symmetric)
16 GB
(dual channel symmetric)
NOTE: The Intel Q45 Express chipset includes a built-in Management Engine (ME), which allocates memory for manageability functions.
Management Engine memory is shared with system memory. If the PC contains a single SO-DIMM, 16 MB of memory is pre-allocated for
it at system startup. If the PC contains two SO-DIMMs, 32 MB of memory is pre-allocated. This memory is not made available to the
operating system, just as pre-allocated video memory is not available.
Supports up to 16 GB of DDR3 SDRAM using DIMM modules. Slot 1 is black and must always be
populated. Not all memory configurations possible are represented below.
NOTE:
For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory
may not be available due to system resource requirements. Addressing memory above 4 GB requires a
64-bit operating system.
NOTE:
The Q45 chipset Graphics Memory Controller Hub (GMCH) supports DDR3 memory technology up to a
maximum of 1066 MHz. Therefore, systems configured with PC3-10600 (1333 MHz) memory DIMMs
will operate at 1066 MHz.
Channel A
1 (black)
1 GB
1 GB
1 GB
2 GB
4 GB
DA - 13424 North America — Version 28 — October 19, 2011
Slot
2 (white)
1 GB
2 GB
4 GB
HP Compaq 8000 Elite Series
Channel B
3 (white)
1 GB
1 GB
2 GB
4 GB
4 (white)
1 GB
2 GB
4 GB
Page 11