HP Compaq 8000 Elite Series Quickspecs page 35

QuickSpecs
Technical Specifications - Communications
Power
Chipset
Dimensions (L X H)
Connection
Other Features
Safety
EMC
Telecom
Other
Requires a 3.3-V auxiliary power rail on PCI express bus
Uses only one PCI express load (i.e., one grant/request pair), one shared IRQ, one electrical load
LSI SV92EX - Integrated PCI interface with 3.3-V tolerant buffers and CardBus support
Complies with PCI express low profile specifications-6.7 x 2.3 in (17.0 x 5.8 cm) and supports high-
and low-profile brackets
Single RJ-11 connector
Digital line protection, call progress monitoring via on-board piezo device, support for high profile
and low profile brackets, PnP ID support
UL recognized to UL 1950, 3rd edition (U.S. and Canada); IEC 950 (TUV, NEMKO, DEMKO, SEMKO); CE
Mark, EC 950 (TUV, NEMKO, DEMKO, SEMKO, CE mark
FCC Part 15, IC ES003, EN 55022, 3rd edition, EN 55024, annex A, EN 61000-4-6, EN 61000-4-8
FCC Part 68, IC-CS-03 (Canada); Worldwide PTT approvals
Not available in Korea or the Republic of South Africa.
The SV92EX device is packaged in a 32-pin micro leadless chip carrier (MLCC). The SV92EX is fully
compliant with the PCI Express revision 1.1 specification. WHQL approved; ASPM compliant.
DA - 13424 North America — Version 28 — October 19, 2011
HP Compaq 8000 Elite Series
Page 35