HP Compaq 8000 Elite Series Quickspecs page 24

QuickSpecs
Technical Specifications
DASH 1.1 support (Desktop and Mobile
Architecture for System Hardware)
ASF 2.0 support (Alert Standard Format)
TXT (Trusted Execution Technology) and
VT-d (Virtualized devices)
Computrace
Towerable Orientation
Drive Lock
Drive Protection System
SMART Technology (Self-Monitoring,
Analysis and Reporting Technology)
SMART I – Drive Failure Prediction
SMART II – Off-Line Data Collection
SMART III – Off-Line Read Scanning with
Defect Reallocation
Available with selected processors which are part of the Intel Stable Intel Platform
Program (SIPP)
Intel Advanced Management Technology (AMT) v5.0
Intel Standard Manageability technologies (see above for a list of features)
Fast Call for Help – client outside the firewall may initiate a call for help via BIOS
screen, periodic connections, or alert triggered connection
Audit Logs – policy based log of AMT actions to deter rogue administrator actions
Microsoft NAP Support – allows AMT to gain access to a Microsoft NAP enabled
802.1x network OOB to enable OOB SW updates, inventories, remote diagnostics,
etc.
Remote Scheduled Maintenance – Pre-schedule when the PC connects to the IT or
service provider console for maintenance
Remote Alerts – automatically alert IT or service provider if issues arise
Access Monitor – Provides oversight to support security requirements
A standards initiative for representing out-of-band management capability for
computer systems. It is a secure, web-services based successor to ASF.
Industry-standard specification for network alerting in operating system-absent
environments
TXT allows for secure management (via TPM) and measured launch of VMM,
as well as teardown of secrets in unexpected reset case. TXT support provided
in select Intel processors
VT-d is a chipset technology that virtualizes directed I/O
Together, TXT and VT-d may be used to support verified launch of a known
trusted VMM that also may protect VMs from accessing each other's memory.
Computrace agent support standard
Product can be oriented as either a desktop or a tower
Implementation of the industry standard ATA Security feature set. When enabled,
it prevents software access to user data on the drive until one or two user-
defined passwords are provided.
DPS Access through F10 Setup during Boot
A diagnostic hard drive self test. It scans critical physical components and every sector
of the hard drive for physical faults and then reports any faults to the user
Running independently of the operating system, it can be accessed through a Windows-
based diagnostics utility or through the computer's setup procedure.
It produces an evaluation on whether the hard drive is the source of the
problem and needs to be replaced.
The system expands on the Self-Monitoring, Analysis, and Reporting Technology
(SMART), a continuously running systems diagnostic that alerts the user to certain types
of failures.
Allows hard drives to monitor their own health and to raise flags if imminent failures
were predicted
Predicts failures before they occur. Tracks fault prediction and failure indication
parameters such as re-allocated sector count, spin retry count, calibration
retry count
By avoiding actual hard drive failures, SMART hard drives act as "insurance"
against unplanned user downtime and potential data loss from hard drive failure
IOEDC: I/O Error Detection Circuitry
DA - 13424 North America — Version 28 — October 19, 2011
HP Compaq 8000 Elite Series
Page 24