Optical Drive - HP 8510w Maintenance And Service Manual

Optical drive

NOTE:
Description
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
Blu-Ray DVD-RW Drive
DVD/CD-RW Combo Drive
DVD-ROM Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Remove the Phillips PM2.5×9.0 screw (1) that secures the optical drive to the computer.
3. Push the optical drive tab (2) to release the optical drive from the computer.
4. Remove the optical drive (3) from the computer.
54 Chapter 4 Removal and replacement procedures
All optical drive spare part kits include an optical drive bezel.
Battery on page 47).
Spare part number
443903-001
443904-001
452220-001
443901-001
443902-001