Tune; Transposer - Johannus STUDIO I User Manual

Handleiding_Studio_Final01.fm Page 12 Tuesday, April 19, 2005 10:14 AM

4.6.1 Tune

4.6.2 Transposer

12
Checking the pitch
1. Press the TUNE button. The lighted button (P through 0) indicates the
pitch.
The light in the TUNE button must remain lit while the pitch
programming is changed.
Changing the pitch
1. Press the TUNE button.
2. Press the button (P through 0) for the desired pitch shift.
3. Wait until the lights in the TUNE button and the P through 0 buttons go
out.
The pitch shift is not stored in memory. When the organ is switched
on again, the most recently programmed pitch will be active.
Programming the pitch
1. Press the TUNE button.
2. Press the button (P through 0) for the desired pitch shift.
3. Press the SET button.
4. Wait until the lights in the TUNE button and the P through 0 buttons go
out.
The pitch shift is stored in memory. When the organ is switched on
again, the programmed pitch will be active.
Checking the pitch
1. Press the SET button. The lighted button (P through 0) indicates the
pitch.
The light in the TRANS button must remain lit while the pitch
programming is changed.