Listening To Bluetooth Audio Player - JVC UX-G980V Instructions Manual

Only "SYS INFO" and "CANCEL" can be selected when
a Bluetooth audio player or Bluetooth headphones are
connected to the System.

Listening to Bluetooth Audio Player

Pairing
• See "What is pairing?" on page 44.
1
Connect the Bluetooth USB adapter, then select "BT
(Bluetooth)" as the source.
• Wait until the Bluetooth indicator flashes.
2
Set the System ready to be paired with the Bluetooth
audio player.
(while holding...)
3
Operate the pairing procedure on the Bluetooth audio
player.
"UX-G980V" appears on the display of the Bluetooth
audio player during the pairing. Then, enter your PIN
code ("0000") on the Bluetooth audio player.
• For details on how to enter the PIN code, refer to the
audio player manual.
"SUCCESS" appears on the display of the System when
the pairing is successful.
• Some Bluetooth audio players are automatically
connected to the System after pairing. If not, establish
connection manually (see the next column).
45
(Exit setting)
Connecting to the Bluetooth audio player
manually
1
Select "BT" as the source.
2
Press Bluetooth SETTING and select "RECEIVE" to
be connected to the Bluetooth audio player.
(while holding...)
• The Bluetooth indicator is lit.
• Now the System is ready to receive audio signals from
the Bluetooth audio player.
3
Start playback the Bluetooth audio player.
You hear music from the speakers of the System.
(Exit setting)