Bluetooth® Operations; Introduction - JVC UX-G980V Instructions Manual

Remote control
Number
buttons
Main unit
The Bluetooth word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Victor Company of Japan, Limited (JVC) is under license. Other
trademarks and trade names are those of their respective owners.
• The System supports only Bluetooth audio player using
the A2DP profile.
• When you are using the mobile phone as the Bluetooth
audio player, you cannot listen to the talking voice from
the speaker of the System.
Bluetooth® Operations
(not equipped
with the
Australian model)
INFO

Introduction

What is Bluetooth?
Bluetooth is a short-range wireless radio communication
technology for the mobile device such as mobile phones,
headphones, and other devices. The Bluetooth audio player
can be connected without cables and can communicate
with each other.
What you can do with Bluetooth
Listening to a Bluetooth audio player
You can listen to the music played back on a Bluetooth
audio player (i.e. mobile phone, audio player, personal
computer, etc.) from the speakers of the System. See page
45.
Listening to music through Bluetooth headphones
You can listen to the music played back on the System
using a set of the Bluetooth headphones. See page 47.
• Some Bluetooth audio players and headphones may not
communicate with the System.
Preparation
Connect the Bluetooth
USB adapter (separately
purchased) to the Bluetooth
ADPT terminal on the front
panel of the main unit.
What is pairing?
To use a Bluetooth audio player for the first time, you need
to register the Bluetooth audio player on the System—
pairing.
• Once you have registered a device, no pairing operation
for the same device is required.
• You can register up to five devices for the Bluetooth
audio player, and up to other five devices for the
Bluetooth headphones. If you register the sixth device,
the registration of the first device is replaced.
• Only one device can be connected at a time.
44