Presetting Automatic Dvd Sound Increase Level; Changing The Display Brightness; Setting The Eco (Ecology) Mode; Changing The Color System And Scanning Mode - JVC UX-G980V Instructions Manual

Presetting Automatic DVD Sound
Increase Level
DVD sound is sometimes recorded at a lower level than
other discs and sources. You can set the increase level for
the currently loaded DVD, so you do not have to adjust the
volume when you change the source.
• This only functions for DVD Video and DVD-VR.
While "DVD/CD" is selected as the source...
(while holding...)
Original recording level.
NORMAL
Output level is increased (less than
MIDDLE
"HIGH").
HIGH Output level is increased (more than
"MIDDLE"). [Initial setting]

Changing the Display Brightness

You can dim the display.
While the System is turned on...
(Canceled)
DIM 1/2 Dims the display.
AUTO Dims the display during playback of picture/
video.
• Dimmer effect is canceled when playback
stops.
17

Setting the ECO (ecology) Mode

Remote
ONLY
Setting the ECO mode allows you to reduce power
consumption by turning the display off while on standby.
While the System is on standby...
• You cannot use ECO Mode while using the Timer.
Changing the Color System and Scanning
Mode
You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the VIDEO
OUT (COMPONENT) jacks, you can enjoy a high
quality picture by selecting progressive scanning mode.
Before playback...
Remote
ONLY
(while holding...)
PAL/NTSC
PAL PRG/
NTSC PRG
(Canceled)
Select for a conventional PAL or NTSC TV.
Select for a PAL or NTSC progressive TV.
• The PRGR. (Progressive) indicator lights
on the display.
Remote
ONLY