Daily Timer Operations; Setting The Daily Timer - JVC UX-G980V Instructions Manual

Remote control

Setting the Daily Timer

Using Daily Timer, you can wake up with your favorite
music. In addition, you can record using Daily Timer.
You can store three Daily Timer settings; however, you can
activate only one of the timers at a time.
• To exit the timer settings, press CLOCK/TIMER as
required.
• To correct a mis-entry during process, press CANCEL
(while holding SHIFT). You can go back to the previous
step.

Daily Timer Operations

Remote
ONLY
INFO
How Daily Timer works
Once the Daily Timer has been set, the timer indicator
( ) and timer number indicator (1/2/3) are lit on
the display. Daily Timer is activated at the same time
everyday until the timer is turned off manually (see "To
turn on or off the Daily Timer" on page 55) or another
timer is activated.
When the on-time comes
The System turns on, tunes in to the specified station
or starts playing or recording the specified source, and
gradually increases the volume level to the preset level
after about 30 seconds.
• While Daily Timer is working, the timer indicator
( ) and the timer number indicator (1/2/3) flash on
the display.
When the off-time comes
The System stops playback or recording, and turns off
(on standby) automatically.
• The timer setting remains in memory until you change
it.
1
Select one of the timer setting modes you want to
set—DAILY 1 ON time, DAILY 2 ON time, or DAILY
3 ON time.
Daily Timer 1 Daily Timer 2
ON (Time)
Canceled
Ex.: When Daily Timer 1 setting mode is selected
• When the clock has not been set, pressing
CLOCK/TIMER makes the System enter the clock
setting mode (see page 19).
Daily Timer 3
ON (Time) ON (Time)
Clock setting
(See page 19.)
54