Table of Contents
Advertisement
Attaching and removing the grinding disc provided
1. Inspect the grinding disc before fitting and during use to ensure it is not deformed or
cracked.
2. Ensure that the guard is fitted in a position which ensures it is between you and the grinding
disc.
The guard is there to protect you from flying objects that may be dislodged at the work piece
and from accidental contact of your hand, fingers or other part of your body with the disc.
3. Do not fit or use a grinding disc for cutting applications.
Grinding discs should be used for grinding metal only.
4. The grinding disc provided is not solid. It is made from grit which is bonded together with
reinforcement and adhesives. It is always possible that a part of the disc can dislodge and
fly away from the tool at high speed. This is why you must wear the appropriate safety
equipment (glasses, gloves and protective clothing) and follow all safety instructions
detailed in this manual.
5. Do not use any kind of attachment (discs or otherwise) that has a diameter greater than 4in.
6. Remove the outer flange by hand if loose.
Page of 11
6
Advertisement
Table of Contents
