Fisher & Paykel OR24SDMBGX Installation Instructions Manual page 17

Hide thumbs Also See for OR24SDMBGX:
Table of Contents

Advertisement

Available languages

Available languages

electrical
connection
If codes permit and a separate ground wire is used, it is recommended
that a
qualified electrician determine that the ground path is adequate.
Check with a qualified electrician if you are not sure whether the range is properly
grounded.
Do Not ground to a gas pipe.
A 120-volt, 60-Hz, AC-only, 15-ampere, fused electrical supply is required. A time-delay
fuse or circuit breaker is recommended.
It is recommended
that a separate circuit serv-
ing only this appliance be provided.
The outlet must be checked by a qualified electrician to see if it is wired with correct
polarity.
This appliance, when installed, must be electrically grounded in accordance
with local
codes.
Recommended
ground method
For your personal safety, this range must be grounded. This range is equipped with a
3-prong ground plug. To minimize possible shock hazard, the cord must be plugged
into a mating 3-prong ground-type
outlet, grounded in accordance
with the National
Electrical Code ANSl/NFPA 70 latest edition and local codes and ordinances.
If a mat-
ing outlet is not available, it is the personal responsibility
and obligation of the customer
to have a properly
polarized
and grounded,
3-prong
outlet
installed by a qualified
electrician.
Electrica|
Shock
Hazard
Plug
into
a
grounded
3-prong
outlet.
Do not remove ground
prong.
Do not use an adapter.
Failure to follow
these instructions
can
result
in
death,
fire,
or
electrical
shock.
3-prong
ground plug
power
supply cord
ground
prong
3-prong polarized
ground-type
outlet
Fig. 3.1
Before any operation of maintenance
disconnect
the appliance
from
the
electrical mains supply.
17

Advertisement

Table of Contents
loading

Table of Contents