Advertisement
NOTE: If wall thickness is 8-1/'2" o1"more, add alumhmnl
flashing o_er bottom of flame opening to assure no v_ aler
can enter area between
inner and outer wall.
I"LONG
\VOOD SCREW
F1G.2
Prepare
and
Instal!
Cabinet
Refer to Step 4 of Window Mounting for assembly of
support brackets.A wooden strip nailed lo the ou/side
wall should be used in conjunction
with sill support
angle brackets.
1. Slide chassis from cabinet. Refer back to Step 1 of
Window Mounting.
2. Place cabinet inlo opening with bottom rail msiing
finnly on botlom board of wooden frame.
3. Position cabinet to achieve proper slope tbr water removal.
(See FIG.t below.)
FIIG.I
5/16"
TO
3/8"
3/4"PLUS
THICKNESS
SEE PARA 5
brakcet
Wooden si-rip
5. Screw or nail cabinet wooden flame using shims if
fi'anae is oversized, to eliminale distortion. Remember
m maintain proper slope as described in Step 3.
LEVEL
4. Secure bottom rail lo wood fi'ame vxillalwo large v,ood
screx_ s l "(2.5 cm)Iong using the lwo holes in lhe bol:tom
of the channel resting on fi'ame.(See FIG.2 following)
6. Inslall chassis into cannel
by following all steps in
Step 8 of Window Mounting.(continued)
Advertisement
