Haier WM6002A User Manual page 15

After switching on the power, the washing machine will set to common program including"wash, rinse,
spin "automatically. To select other procedures, push the "SOAK", " WASH", " RINSE" or "SPIN"
button to select the time of soak, wash and spin, and the times of rinse. After switching on the power,
if you push one of the button among "WASH", "RINSE"and"SPIN", the digitron of the former proce-
dures will turn off automatically. The former procedures will not run. For instance: after switching on the
power. If you push the "spin" button first, it will execute spin singly after starting.
Attention
.
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woollen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
The pulsator will not rotate unless the water is
filled to selected water level.
The soak procedure can work in cooperation with automatic programs like normal, jean, fiber and cotton.There
is intermittent pulsator stirring during soak.
After the machine starts operation, you can only set the program and procedure during washing, and can not
make setting in other cases.
Press " WATER LEVEL "button,
select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth.
After detection, it can set the water level automatically. To select other water level, first push the "START/PAUSE"
button, then push the "WATER LEVEL" button to set the water level. Refer to "standard dosage of the detergent
and water quantity"in Page 9 and "water level button"in Page 11 for selection.
Water Level and Time Table for Each Program (self programming not included)
PROGRAM Water
level
NORMAL 1-10
QUICK 1-10
POSTHASTE 3
JEAN 1-10
FIBRE 1-10
COTTON 1-10
WOOLLEN 1-10
SILK 1-10
Page 9
Wash Rinse (min/time)
(min)
About Save water program, total 10 around
10-16
About 5 Save water program, total 10 around
About 2 Save water program, total 4 around
About 20 Rinse twice, about 5 each
time
About 12 Rinse twice, about 3
About 10 Rinse twice, about 3
About 3 Rinse twice, about 2
About 5 Rinse twice, about 2
Using process Using process
WATER
LEVEL
Page 11
Spin (min) Total time
(min)
About 19-25
About 15
About 6
About 6 About 54
About 4 About 41
About 4 About 49
About 3 About 24
About 3 About 30