Haier HWM65TLF Owner's Manual page 9

Note: Spin shall begin after sometime even if there is no water in
the tub. Do not use soak process for woolen clothes. Clothes prone
to fading should be washed separately.
4. Water Level Selection
After Cycle selection press the Water Lever button to select the proper Water
Lever for wash.
Note: See chart below for Load Size selection.
The Capacity of
Washing (kg.)
3.5~6.5
2.0~3.5
Below 2.0
5.Temp of Wash and Rinse Water Selection
Initial setting Warm/Cold when washer is powered on. Press button to change
selection based on clothes put in washer.
6. Delay Start
To start the washer at a later lime press the Delay Start button and set the time.
When activated the indicator displays 2. Push button once for every 1 hour
delay for up to 24 hours.
Press start button to activate Delay Start.
When the delay timer starts the program select indicator turns off. The
indicator will display the remaining time to turn on the unit. In the lower right
corner of the display, a blinking light will indicate that Delay Start has been
activated.
By pressing the Delay/Start button the selected Process programs will be
displayed.
By altering the running program, the washer will have to be reset.
7. Start/Pause
Press this button when you want the machine to start.
During operation press this button to pause and press it again to resume operation.
Note: By opening the top lid will stop the machine except for water filling or draining.
Water Quantity
Water Level
Large About 76L
Medium
About 56L
Small
About 35L
8