Troubleshooting - Compaq P1100 User Manual

4. A second-level menu displays and adjustment scale. Use the
arrow keys 4 or 5 to select a value on the adjustment scale.
Press the Menu button 3 to exit from that adjustment.
5.
6. To exit from the on-screen menu, press the Menu button again.
Press Reset to return the adjustments to their original settings.

Troubleshooting

Special OSD Messages
Special OSD messages will appear on the monitor screen when
identifying the following monitor conditions:
?# Monitor is Working out of Scan Range, Change Signal Timing
Indicates the monitor is unable to operate with the selected
input signal. Readjust your video setting to a lower resolution.
?# No Input Signal, *Activate Using the PC
*Check Input selector.
?# Monitor is Working, Check Signal Cable
Indicates the video cable may not be plugged into the
computer.
Self Diagnosis
If the screen goes blank and the LED is green, remove any video
connections from video connector 1 or 2. You can also turn off the PC.
Press the power switch twice to turn the monitor OFF then ON again.
Press the right arrow button
enters power saving mode. If a color bar pattern appears then it is likely
the problem is not the monitor. Please check the condition of your
computer. If the color bar pattern does not appear, please inform your
service representative of the monitor's condition. If the power LED is
flashing orange, please make note of the frequency of flashing and
inform your service representative of this frequency.
1-10 English
(contrast increase) before the monitor