Factory Preset Timings; Troubleshooting - Compaq S500 User Manual

Tilt/Swivel Range Tilt : 5 degrees forward, 10 degrees backward
±
Swivel :
Dimension 368(W) X
(set with stand)
Weight(net/gross) 12.5/14.2 Kg
27.6/31.4 lbs
Operating Environment
Temperature : 50 ~ 104°F / 10 ~ 40°C
Relative Humidity : 8 ~ 80%
Storage Environment
Temperature : - 4 ~ 113°F / - 20 ~ 45°C
Relative Humidity : 5 ~ 90%

FACTORY PRESET TIMINGS

Pixel Format V.Freq (Hz) H.Freq(KHz) Pixel Clock(MHz)
640 X 480 59.94 31.47
640 X 480 85.01 43.27
640 X 480 75.00 37.5
720 X 400 70.08 31.47
800 X 600 75.00 46.88
800 600 85.06 53.67
X
832 X 624 74.55 49.72
1024 X 768 60.00 48.4
This monitor has stored the above-mentioned eight timings in the factory. You can
save up to 10 modes in the user memory automatically. Please note that if you
save to user memory more than 10 times, the first mode saved will be replaced
with your 11th mode.
45 degrees leftward, rightward
394(D) X 382(H)mm
Remark
21.175 Noninterlaced
36.000 Noninterlaced
31.500 Noninterlaced
28.321 Noninterlaced
49.500 Noninterlaced
56.250 Noninterlaced
57.283 Noninterlaced
65.000 Noninterlaced
10

TROUBLESHOOTING

Symptom
No picture. Check if power switch and computer power switch
are in the on position.
Check if the signal cable is correctly connected to
the video card.
Check if the pins of D subconnector are not bent.
Check if the computer is in the power-saving mode.
POWER LED is not Check if power switch is in the on position.
lit.
Check if the power cord is correctly connected.
Image is unstable. Check if the signal cable is suitable to the video card.
Image is not Adjust H&V Size or H&V Position to get the proper
centered, too small image.
or too large.
Picture bounces or a Keep the devices that may cause electrical
wave pattern is interference away from the monitor.
present in the
picture. See the FCC information at the front cover of the
manual.
Color looks blotchy. Operate Degauss once.
Picture is blurred. Adjust Contrast and Brightness.
Operate Degauss once.
Edges of available Adjust Pincushion/Trapezoid.
area on the screen
are not straight.
Check
11