Table of Contents
Advertisement
Chapter 2: Camera Configuration
QuickViewer
Click this button to open up a small preview window of the live video, you
can view the image as you make image adjustments. Click the Save button
for the changes to take effect.
Mirror & Flip
Enable Mirror
Flip the camera image horizontally.
Enable Flip
Flip the camera image vertically.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Wide Dynamic Range (WDR)
WDR Mode
Enables or disables WDR function, enable this option if the camera is exposed
to bright backlight, glare or high contrast lighting. You can specifiy the WDR
constrast level as low, middle or high. Selecting high will produce the best
image quality.
White Balance
White Balance Mode
Enables or disables the white balance function on the camera. White balance
allows the camera to produce more accurate colors under different lighting
conditions. The following modes can be selected:
Off:
Disables white balance function.
Auto:
Automatically adjusts the white balance to suit the
current lighting condition.
Fixed Outdoor:
Adjusts the white balance for outdoor daylight.
Incandescent:
Adjusts the white balance for indoor light.
Fluorescent:
Adjusts the white balance for fluorescent light.
Exposure
Exposure Mode
This option configures the anti-flickering function of the camera. If the
image is suffering from flickering under fluorescent light, selecting Auto
will allow the camera to automatically adjust the light frequency to match
the current fluorescent lighting condition and prevent flickering. You can
also manually set it to Anti-Flicker 50Hz, Anti-Flicker 60Hz or Locked.
17
NCo-301-VHR User Manual
Advertisement
Table of Contents
