Anti=tip
bracket
installation
instructions
FASTEN BRACKET (WALL o RFLOOR MOUNTING)
==_l
I_==1 =1/4'' Max,
LeveJing Leg --
-Wall Mount
Floor Mount
Wall Plate
p Bracket
Fig. 24
FASTEN
BRACKET
(FLOOR
MOUNTING
ONLY)
"_J
I'_" More Than
Leveling
Leg --
_-
1 =1/4"'
Wall
I
Floor
Mount
p Bracket
Fig. 25
Electrical
requirements
3 & 4 - Wire electrical
wall Receptacle
types and
recommended
mounting
orientation
on wall
Required
for new and
remodeled
installations
4 Wire Wall
Receptacle
(14-50R)
Allowed
for
exisiting
installations
3 Wire Wall
Receptacle
(10-50R)
Fig. 28
Electrical
connection
requirements
This appliance must be properly installed and grounded by
a qualified technician inaccordance with the National Electrical
Code ANSl/N FPA No. 70 -- latest edition -- and local electrical
code requirements.
This appliance may be connected
by means of permanent
"Hard Wiring" or "Power Supply Cord Kit."
When hard wiring,
do not leave excess wire in range
compartment. Excess wire inthe range compartment may not
allow the access cover to be replaced properly, and could
create a potential electrical hazard ifwires become pinched.
Range Side7
_
Fig. 26
Fig. 27