Safety Instructions; Electrical Requirements - Haier HLP21 User Manual

SAFETY INSTRUCTIONS

Electrical Requirements

Grounding Instructions
This appliance must be grounded. It is equipped with a 3-wire cord having
a grounded plug. The plug must be plugged into an outlet which is properly
installed and grounded.
Warning! Improper use of the grounded wire can result in the risk of electric
shock. Consult a qualified electrician if necessary. Do not attempt to defeat this
safety feature by modifying the plug.
Avoid the use of an extension cord because it may overheat and cause a risk of
fire. However, if it is necessary to use an extension cord:
A. Use only 3-wire extension cord with 3-blade grounding plug.
B. The marked rating of the extension cord must be equal to or greater
than the rating of this appliance.
C. It should be positioned such that it does not drape over the counter
or tabletop where it can be pulled on children or tripped over.
electric shock. Do not use an extension
cord or an adapter plug. Do not remove
any prong from the power cord.
Grounding type
wall receptacle
Attempting any maintenance or cleaning:
To minimize the possibility of electric shock, unplug this appliance from the power
supply or disconnect the dryer at the household distribution panel by removing the
fuse or switching off the circuit breaker before attempting any
maintenance or cleaning (except the removal and cleaning of the lint filter).
Pressing the Power ON/OFF button to an off position or pressing Start /
Note:
PAUSE button, does NOT disconnect the appliance from the power supply.
Wiring Requirements
• This appliance must be plugged into at least a 15 AMP
110-120 VOLT 60 HZ GROUNDED OUTLET.
Avoid fire hazard or
Do not, under any
circumstances,
cut, remove,
or bypass the
grounding prong.
Power supply
cord with 3-prong
grounding plug
English
WARNINGS:
4