Unpacking And Checking Parts - Haier HLP21 User Manual

UNPACKING AND CHECKING PARTS

Unpacking
1. Remove all packing materials. This includes the foam base and all adhesive
tape holding the washer accessories inside and outside. Slide out and remove
the bottom Styrofoam that is used to protect the washer from shipping damage
due to vibrations and shock.
2. Inspect and remove any remaining packing, tape or printed materials before
using the washer.
Note: The bottom panel is located between the top foam used for
protection and box.
Parts
a) 1 Bottom Panel
b) 6 Screws for the Bottom Plate
c) 1 Water Inlet Hose
d) 1 Drain Hook (Gooseneck)
FRONT
FACE TO FLOOR
a
Silver Faucet
Connector
Quick Sink
Faucet
Adapter
e
Check to make sure that the accessories are present and in
good condition. If you find that they are not in good condition
or are missing, please contact our customer service department
for assistance. Our Toll-Free number is
1-877-337-3639.
e) 1 Quick Sink Faucet Adapter
2
f )
g) Optfional 4 Casters
h) Caster wrench
b
c
Optional 4 Pack
g
f
Locki ng ands B
d
Optional Caster
Wrench
h
English
6