Basic Programming For Quick Start - Casio SE-S10 User Manual

Part-1 QUICK START OPERATION

8. Basic Programming for QuICk START

1. To select the date format and monetary mode (if necessary)
You can select the date format and monetary mode after initialization depending on
the requirements in your area. Default date format is Day/ Month/ Year and default
monetary mode is add 2.
P3 appears in mode display
?ZXX
Program set code No.
Select number from list A
Select number from list B
2. Input the desired add-in tax rate to the appropriate department key.
(This procedure below programs add-in tax rate only. If you want to set add-on tax
or tax with special rounding, refer to page 27 of this manual.)
A) Enter and press the
1
B) Press the ~ key.
C) Enter tax rate. (Example: For 6% enter "6", 5.75% enter "5.75".)
D) Press the appropriate department key.
E) Repeat step B) and C) to set other department key.
F) Press the
Note: In case of setting the wrong tax rate to the key, please enter
those department keys above, and quit this procedure by pressing
and start from the beginning of this procedure.
Example :
Set add-in tax 8% to department 2, 3, 15% to department 4 key.
~ Start tax program.
8
8
15
E
12
Procedure
C
X? p
(To end the setting)
key.
key to end tax programming.
Enter tax rate and press dept key.
Enter tax rate and press dept key.
Enter tax rate and press dept key.
To end the setting.
date format Selections
Year/ Month/ Day
A
Day/ Month/ Year
Month/ Day/ Year
Monetary Mode Selections
Add 0 (0.)
B
Add 1 (0.0)
Add 2 (0.00)
?
Mode Switch
REG
OFF
RF
PGM
Select date format
?
Z
monetary mode
X
?
Z
X
and press
Setting the tax rates
key,
CAL X
Z
Purpose
and