Part-1
QUICK START OPERATION
3. Setting the Cash Register
! Plug the power cord of the cash register into AC outlet.
@ Please choose your language followed by printed message.
# When the display shows blinking "0", such as
00-00-00
Enter current date in Day, Month, Year.
$
When the display shows blinking "0", such as
00-00
Enter current time in Hour, Minute.
%
Set the mode switch to REG.
^
Tear off any excess paper.
&
Replace the printer cover slowly.
*Default printer definition is receipt printer.
4. If you want to use a printer as journal printer
! Set printing system as journal.
CAL X
Z
REG
OFF
RF
PGM
Z
Zu
@ Remove the printer cover by lifting up the back.
# Press the
l
key until approximately 20cm of the
paper is fed from the register.
E
10
$
Roll the paper onto the take up real a few turns.
%
Set the left plate of the take up need and place the
reel into the register.
^
l
Press the
key to take up any slack in the pa-
per.
&
Replace the printer cover slowly.