Basic Programming For Quick Start - Time/Date - Casio 140CR - Cash Register User Manual

3. Basic Programming for QUICK START
1. Turn the mode switch to PGM position.
2. When the display shows blinking "0", such as
enter current date in Day, Month, Year order.
Example: 8, January, 2010: enter
• Enter 6-digit, last 2 digits for year set. (2010 → 10)
• If you have changed the date order (page-12), enter date of that order.
• By pressing y , this procedure returns one by one.
3. When the display shows blinking "0", such as
enter current time in Hour, Minute order.
Example: 1:18 PM, enter
• Enter 4-digit, use 24-hour system.
• By pressing y , this procedure returns one by one.
• If you want to adjust the date/ time, please refer to page 33 of this manual.
4. Input the desired add-in tax rate to the appropriate department key.
(This procedure below programs add-in tax rate only. If you want to set add-on tax or
tax with special rounding, refer to page 26 of this manual.)
A) Press the ~ key.
B) Enter tax rate. (Example: For 6% enter "6", 5.75% enter "5.75".)
C) Press the appropriate department key.
D) Repeat step B) and C) to set other department key.
E) Press the k key to end tax programming.
Note: In case of setting the wrong tax rate to the key, please enter
those department keys above, and quit this procedure by pressing k key, and
start from the beginning of this procedure.
Example :
Set add-in tax 8% to department 2, 3, 15% to department 4 key.
~ Start tax program.
S Enter tax rate and press dept key.
8
D Enter tax rate and press dept key.
8
F Enter tax rate and press dept key.
15
k To end the setting.
Procedure
00-00-00
?<?ZZ?
ZCZ<
Part-1 QUICK START OPERATION
,
00-00
,
?
and press
Mode Switch
CAL X
Z
REG
OFF
RF
PGM
Purpose
Programming
Setting the
current date
Setting the
current time
Setting the tax rates
E
11