Related Manuals for Icron USB Rover 200
Summary of Contents for Icron USB Rover 200
-
Page 1: User Guide
USB Rover 200 User Guide Extending the Range of USB Icron by scanmagnetics oy, www.scanmagnetics.com... - Page 2 ©2003 Icron Technologies Corporation. All rights reserved. Icron Technologies Corporation, the Icron Technologies Corporation logo, and the Icron Technologies Corporation products referred to herein are either the trademarks or the registered trademarks of Icron Technologies Corporation. All other trademarks are property of their respective owners. Icron Technologies Corporation assumes no responsibility for errors that may appear in this manual.
-
Page 3: Table Of Contents
User Guide Contents Introduction....................1 Product Contents ..................1 About the USB Rover ................2 Before You Begin ..................3 Installing the LEX unit................3 Installing the REX unit ................3 Completing the Installation ................ 3 Connecting a USB Device ................. 3 Troubleshooting .................. - Page 4 USB Rover 200 Notes...
-
Page 5: Introduction
User Guide Introduction This will help you install the USB Rover 200. The instructions in this guide assume a general knowledge of computer installation procedures, familiarity with cabling requirements, and some understanding of USB devices. : Notes give additional information that could make installation NOTE easier. -
Page 6: About The Usb Rover
The REX unit connects to the USB device through a USB Type A receptacle. An external AC adapter provides power to the unit and to any USB device that may be connected. The REX unit of the USB Rover 200 enables you to connect one full-speed or low-speed USB device. -
Page 7: Before You Begin
User Guide Before You Begin Before you can install the USB Rover, you need to prepare your site. 1. Determine where the host computer is to be located and set up the computer. 2. Determine where you want to locate the USB device. Installing the LEX unit 1. -
Page 8: Troubleshooting
USB Rover 200 Troubleshooting The following table provides troubleshooting help. The topics are arranged in the order in which they should be executed in most situations. If you are unable to resolve the problem after following these instructions, please contact technical support for further assistance (see page 7). -
Page 9: Specifications
1 x full-speed (12 Mb/s) ) or low-speed (1.5 Mb/s) device. USB hub support Conventional USB hubs may be connected in series with the USB Rover 200.The maximum number of such hubs is: 10 meter cables: 4 hubs 20 meter cables: 3 hubs... -
Page 10: Limited Hardware Warranty
Hardware Remedies Icron Technologies Corporation’s entire liability and the Licensee’s exclusive remedy for any breach of warranty, shall be, at Icron Technologies Corporation’s option, either (a) return of the price paid or (b) repair or replacement of hardware, which will be warranted for the remainder of the original warranty period or 30 days, whichever is longer. -
Page 11: Obtaining Warranty Service
Icron Technologies Corporation. We recommend that you insure it or send it by a method that provides for tracking of the package. The repaired or replaced item will be shipped to you, at Icron Technologies Corporation’s expense, not later than thirty days after Icron Technologies Corporation receives the defective product. - Page 12 Icron Technologies Corporation 4664 Lougheed Highway, Suite 275 Burnaby, BC V5C 5T5 Canada Icron by scanmagnetics oy, T: 09-2712200, F: 09-2712210, eml. icron@scanmagnetics.com www.scanmagnetics.com 90-00138-A01...
Need help?
Do you have a question about the USB Rover 200 and is the answer not in the manual?
Questions and answers