Watching Tv Program - Haier 29F9D-P Owner's Manual

Watching TV
You can watch TV program in a preset channel.

Watching TV program

1 2 3
4 5 6
7 8 9
0
CH+
VOL VOL
MENU
- +
CH-
TUNE
CH+
VOL VOL
MENU
- +
CH-
How to select TV program
Select the desired program
1 Using "Program number" buttons
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
2 Using the CH+/- buttons
Press the CH+ button to select a channel number in number
increasing direction.
Press the CH- button to select a channel number in number
decreasing direction.
Select the desired sound
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~99. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
If the colour or sound of a channel is abnormal
The settings of the colo r
system or the sound system
may be wrong.
Press the TUNE button and
setting menu shown on the
right will display on the screen.
If picture colo r is abnormal u
Use the CH+/- buttons to select Colour then the
VOL-/+ buttons to change between Auto,
SECAM and NTSC443
the setting.
If the picture sound is abnormal
Use the CH+/- buttons to select Sound then press the
VOL-/+ buttons to select the sound system.
u
TUNE
COLOUR
SOUND
BAND
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
. Press the EXIT button to save
AUTO
BG
VHFL
OFF
0
PAL, NTSC,