Watching Tv Programs; Watching Tv Program - Haier 29FV6 Owner's Manual

Watching TV Programs

Watching TV programs
CH+
VOL- MENU VOL+
CH-
FUNCTION
CH+
VOL- MENU
CH-
How to select the TV program
1. Use the direct number selection button
Select the desired program
Press the button from 0-9 to select a one-figure channel.
If you want to select a double figures channel, press the
figure-selection button and change it into two-figure mode, then
press the number of the channel.
If you want to select a three figures channel, press the figure-selection
button and change it into three-figure mode, then press the number
of the channel.
2. Use the CH+/- buttons
Press the CH+ button to select the channel of the larger number.
Press the CH- button to select the channel of the smaller number.
TIP: When the channel is stored, then the program number
is yellow. When the channel is empty, then the program
number is red.
Select the desired sound
Press the VOL+/- buttons to adjust the volume to your need.
If the colour or sound of a certain channel is
abnormal
If the TV set you bought is
abnormal in colour or sound in a
certain channel, it might be
because the colour or sound
system has been set improperly.
You may follow the instruction
below to adjust it. Press the
FUNCTION button, and you can
see the form .
If the colour of the picture is abnormal
Press the CH+/- buttons to move the indicator to "Color Sys.", and
press the VOL+/- buttons to select the proper colour.
VOL+
If the sound is abnormal
Press the CH+/- buttons to move
the indicator to "
press the VOL+/- buttons to select
the proper sound. (If the TV set you
bought had multi-system, then
M, B/G and I
", and
Sound Sys.
D/K,
will appear alternately.)
Picture
Sound
Tuning
Function
Language English
Color Sys. Auto
HDM Scan
Digital Plus
Amusement
Special
Picture
Sound
Tuning
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
Function