Lucent Technologies 8528T User Manual page 79

Press the softkey below Begin to start the self-test. (Press the
4
softkey below Cancel if you do not want to initiate a self-test of your
voice terminal at this time.)
When you press Begin, the following occurs:
The display reminds you to press
—
end the self-test.
Terminal emits a tone.
—
Message light goes on.
—
The display shows you the Feature Package number and the
—
Self-Test passed message.
If these events do not occur, contact your system
NOTE:
manager.
After you hear repeated tone, press any button on the voice terminal.
5
Terminal emits a key click.
Press ,
6
Speaker
Mute
Lights to the left of the Mute, Speaker, Conf, and Transfer
buttons go on steadily.
,
Press
7
Redial Exit
Lights to the left of the Mute, Speaker, Conf, and Transfer
buttons flutter.
Pick up handset and press each dial pad key.
8
Message light flutters.
Handset emits a touch tone as each key is pressed.
Hang up handset.
9
When the self-test is completed, press
10
If you do not press
NOTE:
terminal automatically exits the self-test after 30 seconds.
Exit
, and
,
Conf Transfer
.
, , and
Drop Hold
Exit
twice to end the test, the voice
Exit
71
twice if you wish to
.
twice.