DI 440
On button
Off button
Programme selection button
Start button
Switches "on" when the dishwasher is
operating. Flashes when a fault occurs.
Switches off at the end of the programme.
Indicators
Add rinse aid
Add regeneration salt
Only add regeneration salt immediately
before starting a wash programme.
Programme chart
Programmes
Pre-Rinse
Quickwash
1)
Normal
Normal
Intensive
1)
Reference programme for energy label in compliance with
EN 50242 regulations;
2)
Refer to "User instructions";
Before using the dishwasher, read the user instructions!
Quick Reference Guide
Loading instructions
cold
Crockery to be washed later.
Lightly soiled crockery, with
40°C
no dried-on food.
50°C
Normally soiled crockery.
65°C
Normally or heavily soiled crockery.
Recommended programme for
70°C
heavily soiled crockery, especially
suitable for pans and saucepans.
Options
"Delayed start" button
The wash cycle can be programmed
to start after 3-6-9 hours.
Then press the Start button.
The wash programme will start
at the set time.
"Half Load" button
This function can be used with any
programme. The indicator lamp lights
up. Load the upper or lower rack
only.
2)
Detergent
A
B
-
-
X
-
X
X
X
X
X
X
3)
Program data obtained in conformity with European
standard EN 50242. Values may vary in relation to usage,
e.g.: different loads, water temperatures - above or below
15°C - as well as water hardness and power supply
voltage, etc.
(We reserve the right to make technical modifications)
GB
3)
Consumption
Litres
kWh
Minutes
4.0
0.03
14
10.0
0.65
30
13.0
1.24
128
13.0
1.45
90
14,0
1,70
140
5019 696 93138
CAP/I/FD/GB
Need help?
Do you have a question about the DI 440 and is the answer not in the manual?
Questions and answers