Care And Cleaning - Melitta Java-Pod MES1B Use And Care Manual

Helpful Hints for Brewing
Fresh Water
Use fresh water daily. If you haven't used your coffee maker for a few
days, rinse the Water Tank, fill it with fresh water and turn on the
appliance for a full cycle, with water only before using a java-pod
again.
Note: If Water Tank becomes dry for 3 or more days, see section
"Before Using Your One:One
steps 1-7.
Java-pods ™
Remove the java-pods
pod ™ inside the coffee maker for some time without having used the
coffee system, remove it and turn on the appliance for a full cycle,
using water only, before attempting to brew coffee. See "Before Using
Your One:One ®

Care and Cleaning

CAUTION: Do not immerse cord, plug or coffee maker in water or
other liquid. Never immerse the appliance in water.
1. Always unplug the appliance before cleaning.
2. Clean the outer surface of your coffee maker and the Water
Diffuser with a damp cloth.
3. Remove and disassemble the Pod Holder, Pod Chamber and
Drip Spout. To remove Drip Spout, press Lever on the
back side of the Drip Spout, see Figure 9.
™ after use. If you happen to have left a java-
Java-Pod ™ Coffee Maker," page 6.
™ Java-Pod
11
™ Coffee Maker,"
Lever
FIGURE 9
™