Contents 6.11 Batch mode ............General ������������������������������������������������������������� 6.12 Product dispensing via product filter ....Manufacturer information ......... 6.13 Preparing coffee from ground coffee ....About these instructions ........Explanation of symbols ........Settings ����������������������������������������������������������� Description ............Opening the manager menu ......Accessories ............
Page 3
Chapter overview General Safety Technical data Installation Operation Dispensing products Settings Cleaning Maintenance Translation of the original operating instructions Recycling and disposal 26288 • 20170701...
This machine is a fully automatic coffee machine. 1�1 Manufacturer information Depending on the machine equipment level, the following products can be dispensed: Melitta Professional Coffee Solutions GmbH & Co. KG ͵ Coffee, coffee and milk, and milk products Zechenstr. 60 32429 Minden ͵ Instant products Germany ͵...
• Stationary installation within dry, enclosed rooms ͵ 1 microfiber cloth ͵ 1 tin of Melitta Cafina Multi TF-Tabs (art. no. 31547) This machine is not intended for the following uses: ͵ 10 bags of Melitta Cafina AMC cleaner (art.
• must be supervised by trained personnel. Repairs and maintenance work may only • be carried out by Melitta customer service or by specialist personnel authorized by the manufacturer. Incorrectly performed repair work can result in considerable risk to the user.
Technical data Do not hold any body parts under the Technical data • outlets when hot liquids or steam are being dispensed. This occurs in the Machine specifications following situations: Dimensions (W x D x H) 300 x 650 x 810 mm After switching on ͵...
Installation Installation 4�1�3 Installation location The machine is only to be installed and used in enclosed, The machine is set up, installed, and handed over ready dry areas; it must not be operated outdoors. for use by customer service. Due to the associated The effects of humidity and temperature may adversely hazards, modifications to the installation or setup must affect the function and safety of the equipment.
Installation 4�2 Canister operation (option) In daily operation, the fresh water canister must be filled with sufficient water and the waste water canister must If your machine cannot be permanently connected to be drained when necessary. the fresh water and waste water system, you can also operate it with two canisters.
Operation Operation 5�1�4 Logging in with a chip key Initial commissioning is carried out by customer service. If you want to put the machine back into operation following a standstill, clean the machine as described (see chapter 8 on page 31). 5�1 Chip keys Included with the machine are two green user chip keys...
Operation 5�2�2 Stand-by operation 5�2�3 Switching off In daily operation, it is sufficient to switch the machine Note on and off via the display only (stand-by operation): For hygiene reasons, the machine must be switched off only in a cleaned state. 1.
Operation For an extended standstill To simplify filling, the relevant container can be removed. If the machine will not be used for an extended period, turn off the water supply and switch off the main switch. Note For hygiene reasons, the machine must be switched off only in a cleaned state.
Operation 5�3�2 Filling the instant powder (option) 5�3�3 Filling the milk (option) There will be one or two milk containers and milk tubes Note depending on the equipment. If you have a lockable instant container, use the key to open and close the lid. Fig.
Operation 5�4 Confirming filling levels Filling level Cocoa The filling level must be confirmed at the machine each time a supply container is filled. Filling levels Limit value Designation Cocoa Bean container 1 Bean container 2 Instant container Cancel Apply Fig.
Operation 5�7 System messages 5�7�1 Messages in self-service operation In self-service operation, system messages are indicated by a notice symbol. English Espresso Café Crème Fig. 13: Emptying the coffee grounds drawer 1. Swivel the wand (2) (if present) forwards. Cappuccino 2.
Dispensing products Dispensing products You can select dispensing products sorted into groups by opening the specified group via touch and accessing the required product for dispensing. After a product from a Note group has been dispensed, use the "Home" (4) button Before dispensing products, all supply con- (top left in self-service operation, see Fig.
Dispensing products 6�3 Dispensing coffee, coffee and milk, and milk 2. On the display, press the button for dispensing hot products water. 9 The product is dispensed. 6�5 Dispensing steam (option) Depending on the equipment provided, the steam wand may be one of the following: ͵...
Dispensing products 4. Position the steam wand over the drip grid. 4. Position the steam wand over the drip grid. 5. Then press the button for steam dispensing again to 5. Confirm the request with "Start" to blow out the blow out the steam line.
Dispensing products 6�7 Dispensing a double product 6�8 Dispensing quick start products If this function is enabled by customer service, you can Depending on the preset in the manager menu (see request two portions of a coffee/milk product and fill two chapter 7.1 on page 22), you can use the quick start cups simultaneously.
Dispensing products 6�9 Dispensing multiplicator products 6�11 Batch mode Under product settings (see chapter 7.6 on page 26), If this function is enabled by customer service, you can you can set up products as multiplicator products. With preselect several products with the batch mode and this you can issue multiple portions of a product in suc- dispense them in sequence.
Dispensing products 6�12 Product dispensing via product filter 4. Press the "" button (1) to continue dispensing the products. When dispensing products via the product filter, use ͵ Once all products from the batch have been dis- various selection criteria to select the required product pensed, the machine returns to the start screen.
Settings 1. Select the required product to be dispensed using Settings these criteria in the product filter (1). ͵ Only products that match your criteria will be dis- The machine is preset to ensure that it is ready for played. If multiple products meet your preselec- immediate use for normal operation.
Settings 7�2 Carrying out inputs 7�4 Menu option "Selection" The machine allows you to enter designations and quan- Here you can select which pre-programmed products are tities via a screen keyboard. displayed for dispensing. When the screen keyboard appears on the display, you can use the following functions: Waiter operation Self-service operation...
Settings 7�4�3 Adding dispensing products Name selection Self-service and waiter operation Language selection 1. If you wish to add a dispensing product to a product Name line 1 Name line 2 group, open the required product group by pressing the symbol twice. Category models Category models Group name...
Settings 7�4�5 Editing the dispensing view 7�5 Menu option "Product filter" 1. Press the required product group or product button. Here you can set the selection criteria for filtering dis- 2. Select one of the following options to edit the display pensing products available in waiter operation.
Settings 7�5�3 Editing main criteria 7. Save your changes using the "Save" button. ͵ Otherwise you will be prompted to confirm 1. Select the required main criterion (2). whether you want to discard the changes or 2. Use the buttons under "Configuration" (3) to select whether you want to go back to save the changes.
Settings 7�7 Menu option "Unit" If the filling level for a consumable drops below a set value while a product is being dispensed, a warning will Here you have the option of adjusting the filling levels, appear on the display. cleaning the machine, or switching it off.
Settings 2. Carry out the required option: 7�8 Menu option "Operation" Here you can read off the consumption and product Note statistics and adjust settings for the machine. For hygiene reasons, the machine must be switched off only in a cleaned state. 7�8�1 Opening usage statistics The "Switch off"...
Settings 7�8�3 Machine settings 2. Use the "" and "" buttons to move the list to display all the programmed products. 3. Press the "Filter" button (1) to display products Settings according to various criteria. Current language Standard language Configure language selection and location 9 The product statistics are opened.
Settings 7�8�4 Logging Time Set the current time using the screen keyboard. 1. Press the "Logging" button (2) (see Fig. 41) to display important events or error messages on the machine. Summer time Choose between the settings ͵ You can use the filter to display events according "Automatic"...
Cleaning Cleaning 8�2 Cleaning intervals Interval Which parts? How to clean Clean the coffee machine carefully in accordance with After every use Steam wand Emit steam for the following specifications to maintain the value and approx. 2 seconds. hygiene of the machine. Then clean with a clean, damp cloth.
• Melitta Cafina Multi TF-Tabs (art. no. 31547) • Melitta Cafina AMC cleaner (art. no. 25363) 1. Empty the coffee grounds drawer as described in chapter 5.5 on page 14.
Cleaning 3. Clean the coffee grounds drawer as described in chapter 8.6 on page 32. If prompted to clean the instant system first, complete this process first (see chapter 8.8 on page 36) and then confirm that it has been fully re-installed. 4.
Page 34
Cleaning 8�7�3�2 Cleaning with AMC cleaner (systems without The prompt "Cleaning agent milk system" is then shown top foam) on the display again. If the system has indicated that you should use AMC cleaner, clean the machine as described in chapter 8.7.3.1 Cleaning of full system on page 33;...
Cleaning Cleaning of full system Start of cleaning End of cleaning still Time Time Cleaning agent milk system Cleaning agent was added AMC cleaning agent was added Please add the cleaning agent for the milk system to the relevant cleaning container. Fig.
Cleaning 8�8 Cleaning the instant system Fig. 50: Cleaning tablet Fig. 51: Removing the instant system cover 3. Insert a cleaning tablet (1) into the tab holder. 4. Turn the tab holder a quarter turn clockwise firmly 1. Open the instant system cover with the key (2). back into the machine (2).
Page 37
Cleaning 3. Remove the powder chute (2). Assembling the mixer unit 4. Remove the tube (6) on the mixer housing and on the Assembly is carried out by reversing the order of the beverage outlet. removal process. 5. Turn the mixer flange (5) counterclockwise as far as it will go.
Cleaning 4. Turn the mixer flange (5) clockwise as far as it will go. 8�10 Cleaning the bean container 5. Fit the tube (6) fully onto the nozzle of the mixer unit There will be one or two bean containers depending on and the beverage outlet.
Cleaning 8�11 Cleaning the instant container 8�12 Cleaning the touch screen Cleaning is required if there is any visible dirt. 1. On the display, press the "Unit" button. ͵ In self-service operation, you must first log in with a chip key (see chapter 5.1.4 on page 10). 2.
Repairs and maintenance may only be carried out by • Clean the parts with a clean, damp cloth Melitta customer service or by specialist personnel only. authorized by the manufacturer. 1. Wipe down the plastic parts, painted surfaces, and surfaces with a damp cloth.
Recycling and disposal Recycling and disposal This machine has been designed and manufactured to allow environmentally friendly disposal. 10�1 Waste disposal The waste produced during brewing is purely organic and can therefore be disposed of in normal household waste. 10�2 Waste water disposal The waste water produced during the brewing and cleaning processes complies with the definitions of...
Need help?
Do you have a question about the Cafina CT8 and is the answer not in the manual?
Questions and answers