Vax KURV K-010 Instruction Manual page 4

Vax K-010&011 User Guide.qxd
www.vax.co.uk
3. Storage / Charging
Charging / Storage base
Designed to sit in the charging base on a flat surface.
Charging
NOTE: Use only the charger supplied by the
manufacturer to recharge.
IMPORTANT: Before first use, charge your unit
!
for at least 24 hours.
Power switch must be in the OFF position when unit is
charging on base. If charging light is not illuminated, press
ON/OFF button to assure unit is turned off. Remember,
unit will not charge if charging light is not illuminated.
Place unit in charger/storage base (Fig.3/1).
Fig.3/1
Make sure to align slot in cleaner with charging tab on back
of base (Fig.3/2).
Slot
Fig.3/2
Connect wall charger to the outlet (Fig.3/3).
4
storage / charging
17/9/07 17:47 Page 4
Fig.3/3
Charging light will illuminate when unit is properly placed in
the base. Unit will be charged in 16-24hours. The light
will not change colour or shut off when the unit is fully
charged (Fig.3/4)
Fig.3/4
Charging
Tab
Charging
Light