Functions & Features; Warning; Reset Function (Resume Factory Default) - CRT SS 6900 User Manual

FUNCTIONS & FEATURES
Big LCD which displays frequency and all kinds of information
11
DUAL-DIGITAL TUBE FOR CHANNEL DISPLAY
21
USE EL technology for backlight
31
PA 、CW、AM、FM、USB、LSB mode
41
A 、B、C、D、E、F , 6 bands in total, with 60 channels at most in
51
each band to be programmed.
Frequency Tuning Step can be 10HZ, 100HZ, 1KHZ or 10KHZ.
61
Multiple CLARIFIER Operating Modes
71
Flexible menu functions and PC programming software to meet
81
varied customer demands
ECHO Function
91
SQ, ASQ Function (FM and AM mode only)
111
RF GANI ADJUSTMENT
111 GAIN
RF PWR ADJUSTMENT
1 121
SCAN FUNCTION
131
RB FUNCTION
141
NB/ANL FUNCTION
151
DW DUAL-WATCH FUNCTION
161
BEEP VOICE PROMPT
171
+10KHZ Function
181
SWR 、S/RF、DC Voltage display function
191
TOT function
211
HI-CUT FUNCTION
211
EMG CALL
221
SWR PROTECTION
231
POWER SUPPLIED VOLTAGE PROTACTION
241
Key-Lock Function
251
WARNIGN
To use the radio, please connect the antenna to the location "B" on the
back panel of the equipment firstly and then set the SWR (Standing
Wave Ratio) before transmitting. Failure to do so may result in
destruction of the power amplifier, which is not covered by the guarantee.

RESET FUNCTION (Resume Factory Default)

This CB Radio introduces RESET FUNCTION to prevent accidents
and provide a solution for customers who changed some functions
unconsciously and do not know how to resume normal settings. The CB
Radio will resume factory default once this function is activated.
How to Operate:
Step 1: Power off the radio.
Step 2: Press and hold FUNC and SCAN keys at the same time,
followed by powering on the radio.
Step3: Release the two keys when LCD displays "RES".
All former settings would be replaced by Factory Default value when
LCD displays "REND" .
WARNING: All former settings would be replaced by Factory Default
value after operating the RESET FUNCTION.