F300 Series Speakers Break-in Period Allow several hours of listening time to adequately break-in the F300 Series speakers. As the speakers break-in, the driver suspension will loosen. The result of break-in will be an increase in low frequency response, improved definition, and...
To protect the tweeter against being over driven, a Polyswitch (a DC current limiting device) is incorporated in the crossover network. Each F300 Series speaker model features an extensive crossover network. The use of these high quality crossover networks allows each speaker to operate at its optimal performance.
Page 4
Attaching Speaker Wires (continued) If not using a banana jack, simply loosen the binding nut to allow the hole in the side of the terminal to become exposed. Strip ¼-inch of the insulation from the end of the speaker wire and insert the exposed wire end into the now exposed hole in the side of the terminal.
Page 5
Room Setup Suggestions Rear Surround Speakers The F300R 2-way Bookshelf Speakers may be placed either above, behind or to the sides of the listening position. The listening position should be centered between the surround speakers. For best performance you may want to experiment with angling the surround speakers either towards or away from the listening position.
Warranty Your Destination Audio F300 Freestanding Speakers are covered by a limited warranty against defects in materials and workmanship for a period of 5 years from the original date of purchase. This warranty is provided by the authorized Destination Audio dealer where the speaker was purchased. Warranty repair will be performed only when your purchase receipt is presented as proof of ownership and date of purchase.
Need help?
Do you have a question about the F300 SERIES and is the answer not in the manual?
Questions and answers