Preferences; Redial A Number; Ring Setting - Cisco 8941 User Manual

Preferences

Preferences
1 Ringtone
2 Brightness
3 Bluetooth
4 Camera Settings

Redial a Number

To redial the most recently dialed number:
• Lift the handset and press the Redialsoft key.
• Press the Redial soft key to make a call using a speakerphone or headset.
• To place the call on a particular phone line, get a dial tone on that line, then press the Redial softkey.

Ring Setting

You can change the ring setting per line.
Procedure
Step 1 On your User Options web page, choose User Options > Device.
Step 2 Select a phone from the Name drop-down menu.
Step 3
Click Line Settings.
Step 4 If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5
In the Ring Settings area, set the option for Ring Setting (Phone Idle) and Ring Setting (Phone Active) from
the drop-down menus. The options are:
• Use System Default
• Disable
• Flash Only
• Ring Once
• Ring
• Beep Only [this option is only available for Ring Setting (Phone Active)]
Step 6 Click Save.
Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager Express Version
8.8 (SCCP)
20
Operating Your Phone
OL-24415-01