Sennheiser e 912 S Specifications

The e 912 S is a
high-quality, pre-polarized
condenser microphone with
half-cardioid pick-up pattern,
acoustically optimized for
picking up speech*. Due to
its unobtrusive, flat design,
it is ideally suited for use on
conference tables, altars and
lecterns. The e 912 S can
be switched on and off via an
integrated membrane switch.
* The e 912 S has been optimized for picking up
speech at relatively short distances, while the
sister model e 912 has been designed for
instrument pick up. For this reason, the frequency
response curve of the e 912 S differs from that
of the e 912. With the e 912 S, you can obtain the
frequency response curve of the e 912 by setting
the DIP switch to the position lin (linear).
912 S
Programmable membrane switch

Unobtrusive, flat design

Extremely rugged sound inlet basket

Shock-absorbing rubber base

Mounting slots for fixed installations in tables, lecterns, etc.

Available in black, white, or non-reflective Nextel

Gold-plated XLR connector

Integrated electronics (instead of in-line preamp)

An internal DIP switch bank provides the following features:

on/off (factory preset), push-to-talk button (PTT), push-to-mute (PTM)
or permanently switched on (ON)
The frequency response curve can be changed via a second DIP switch

bank: low cut, low and high boost (factory preset), low boost or linear
Includes: e 912 S boundary microphone

Pouch
User manual
Warranty Certificate
Boundary
Microphone
® grey