Rear Panel - TC-Helicon VoiceWorks User Manual

Balanced
Mic Input
with +48V
Phantom
Power
Note!
The microphone input on the VoiceWorks
has +48V phantom power capability.
Never plug single ended (unbalanced)
microphones or instruments or signal
processors (balanced or unbalanced)
into the mic input if +48V phantom
power is on.
The 1/4" analog Input and Output
connectors on the VoiceWorks are balanced
1/4" jacks.
Optimal connection to balanced equipment
is achieved using balanced cables.
However, if your equipment is NOT
balanced you will generally have no
problems using standard mono-to-mono
cables as illustrated below.
Mono 1/4" Cable
TIP
GND
GND
TIP
8

REAR PANEL

Balanced
Balanced
Jack
Jack
Analog
Analog
Input
Outputs
MIDI Cable
TRS (Tip Ring
Sleeve) 1/4"
balanced Cable
TIP
RING
GND
GND
RING
TIP
Digital
S/PDIF
Input/
Output
DIN CONNECTOR
5POLE - MALE
max. 10m
45 degrees
SHIELDED CABLE (3 or 5 wires + screen)
Balanced XLR Cable
- 3 Pin Type
External
MIDI
Control
In, Out, Thru
DIN CONNECTOR
5POLE - MALE
45 degrees