Administration - 3Com WL-455 User Manual

first be enabled and the Network Management Station must submit a valid community
string for authentication. Select SNMP Enable and enter data into the fields as
described below. When you are finished, click Apply.
• Location—Specifies the access point location.
• Contact—Sets the system location string that describes the system location.
• Community Name (Read Only)—Specifies a community string with read-only
• Community Name (Read/Write)—Specifies a community string with read-write
• Trap Destination IP Address—Fill in the IP address box for a trap manager that
• Trap Destination Community Name—Fill in the community string box for a trap
A
DMINISTRATION
The Administration page allows you to perform access point management tasks as
described below.
• Change Password—A password is required to configure the access point. Enter
• Firmware Upgrade—You can upgrade firmware from a downloaded file that you
• Backup and Restore Configurations—Access point configurations can be saved
(Maximum length: 255 characters)
access. Authorized management stations are able to retrieve MIB objects. The
default is "public." (Maximum length: 23 characters)
access. Authorized management stations are able to both retrieve and modify MIB
objects. The default is "private." (Maximum length: 23 characters)
will receive these messages.
manager that will receive these messages. (Maximum length: 23 characters)
the user name and new password in the spaces provided and click Apply. It is
recommended that you change the password from the default value (no password)
to ensure network security.
have placed on the local computer, or from a remote FTP or TFTP server.
• Local—Click Browse to locate the downloaded firmware file. Click Start
Upgrade to start the upgrade process. The upgrade takes place through the
HTTP protocol from the local machine.
• Remote—Select FTP or TFTP. Enter the firmware file name, the host IP
address where the file is stored, the user name, and the password. Click Start
Upgrade to start the upgrade process.
as data files and later used to restore the access point configuration. This option lets
36