Using The Included Ac Adapter - 3Com WL-455 User Manual

There are three ways to supply power to the access point:
• Use the AC adapter included with the Access Point 7250
• Use a 3Com Integrated Power-over-Ethernet power supply. In this case, you need
to supply a second Ethernet cable to connect to the wired LAN.
• Connect the access point directly to your own power-over-Ethernet hub or switch,
which must also comply with the IEEE 802.3af standard.
• If you supply your own Ethernet cable for connecting power, be sure that it is
standard category 5 straight-through (8-wire) cable that has not been altered in any
way. Use of nonstandard cable could damage the access point.
U T I
SING HE NCLUDED
The power supply included with the Access Point 7250 is an AC adapter.
1 Connect the power cord to the AC adapter and plug the cord into a power outlet.
2 Connect the DC power into the Access Point 7250.
Ethernet cable

Using the included AC adapter

AC A
DAPTER
15
AC adapter