D-Link DSL-2750E User Manual page 74

DSL-2750E User Manual
Click Add to add a static route. The page shown in the following figure appears.
The following table describes the parameters of this page.
Field
Destination
Address
Subnet Mask
Use Interface
Click Apply to save the settings.
3.3.13.2 IPv6 Static Route
Choose ADVANCED > Routing and click IPv6 Static Route. The page shown in
the following figure appears. This page is used to configure the routing
information. In this page, you can add or delete IP routes.
Click Add to add a static route. The page shown in the following figure appears.
Network The destination IP address of the router.
The subnet mask of the destination IP
The interface name of the router output port.
Description
71