D-Link DSL-2750E User Manual page 38

DSL-2750E User Manual
The following table describes the parameters of this page.
Field
Enabled
SSID
Select Mode
Configuration
State
Push Button
Input Station PIN
When Registrar mode is chosen, the following page appears. In this condition,
only PIN button can be used.
To enable WPS function and be able to set the
following settings.
The name of your wireless network.
Select the mode either Registar or Enrollee. When
a router is in Registar mode, the client should be in
Enrollee mode, and vice versa.
When Configured state is selected, wireless
parameters (for example, the encryption password)
are provided by the CPE in WPS negotiation. When
Unconfigured state is selected, wireless
parameters are provided by the connecting user end
(for example, PC).
Press the button, the CPE will connect the station
automaticlly.
You need to enter a pin which the Enrollee
generated. Press the button to connect the other
with the pin.
35
Description