System Requirements; Features - D-Link DSL-2750E User Manual

DSL-2750E User Manual
The following table describes the interface of the device.
Interface/Button
DSL
LAN4/3/2/1
USB
WPS
WIRELESS
ON/OFF
ON/OFF
12V DC IN
Reset (on the
bottom case)

1.4 System Requirements


A 10 baseT/100BaseT Ethernet card is installed on your PC.

A hub or switch (attached to several PCs through one of Ethernet
interfaces on the device)

Operating system: Windows Vista, Windows 7, Windows 98SE, Windows
2000, Windows ME or Windows XP

Internet Explorer V5.0 or higher, Netscape V4.0 or higher, or Firefox 1.5 or
higher

1.5 Features


Various line modes

External PPPoE dial-up access

Internal PPPoE and PPPoA dial-up access

Leased line mode

1483B, 1483R, and MER access
RJ-11 interface that connects to the telephone set through
the telephone cable.
Ethernet RJ-45 interfaces that connect to the Ethernet
interfaces of computers or Ethernet devices.
USB port, for connecting the 3G network card or other USB
storage devices.
Press the button for 1 second to enable WPS function.
Press the button silently to enable WLAN function.
Power on or off the device.
Interface that connects to the power adapter. The power
adapter output is: 12V DC 1A.
Reset to the factory defaults. To restore factory defaults,
keep the device powered on and push a paper clip into the
hole. Press down the button for 1 second and then release.
Description
4