D-Link DSL-2750E User Manual page 13

DSL-2750E User Manual
The following table describes the fields in this page.
Field
Country
ISP
Protocol
Encapsulation
Mode
PVC Settings
Note:
Different protocol requires entering different information. You can fill in
the entries according to what your ISP provides you.
Click Next. The page shown in the following page appears.
Select the country you located from the drop-down list.
Select the ISP you subscribed the internet service
from.
Select the protocol you subscribed from your ISP.
Select the method of encapsulation provided by your
ISP. You can select LLC or VCMUX.
VPI: The virtual path between two points in an ATM
network. Its valid value is from 0 to 255.
VCI: The virtual channel between two points in an ATM
network, ranging from 32 to 65535 (0 to 31 is reserved
for local management of ATM traffic).
Description
10