Honeywell Domonial User Manual page 7

AUDIBLE CONFIRMATIONS OF THE SYSTEM
ARMING
configuration
DISARMING
configuration
PART SET
arming
confirmation
FAULT signal
ALERT
confirmation
Exit delay
confirmation
Entry delay
Sequence of 3 modulated sounds
Duration : 4 seconds
Long and continuous beep
Duration : 2,5 seconds
Sequence of 2 modulated sounds
Duration : 2,5 seconds
2 times 7 fast beeps
4 beeps in case of alert...
sent via the keypad
Upon arming...
one beep every second
Upon entry...
one beep every second
When Arming, confirms that the control
panel has received the information.
When Disarming, confirms that the control
panel has received the
information.
This confirmation indicates
Part arming of the security system
This signal indicates a fault in the system
Confirms the transmission of an alert to the
Alarm Receiving Centre
This will sound until five second after the exit
door is closed
This entry tone sounds for 30 seconds after
you open the entry door. You should disarm
your system within this time.
7