Honeywell Domonial User Manual page 12

How to use your keyfob (Optional)
The keyfob is an optional extra. This can be used to arm or disarm your
security system as well as to trigger an audible or silent alert.
ARMING
Press key :
The indicator light on the keyfob comes on briefly when you release
the button
- An audible confirmation
is simultaneously emitted by the signaling equipments.
Always make sure that your arming the system is followed by the audible confirmation. N.B.
Arming and disarming can only be operated whilst inside the premises.
If, upon arming, a door or window contact is in the "open" position (e.g. window not properly
shut), a FAULT signal will inform you. Disarm the system, shut the corresponding window
and repeat arming.
DISARMING AFTER ENTRY
Press key :
The indicator light on the keyfob comes on briefly when you release the button.
- The audible confirmation
signaling equipment.
N.B. This function can only be used when the entry route delay has been triggered.
is emitted by the
12