Table of Contents
Advertisement
7. Drill pilot holes at the center points of the top bracket (Part #6) and
the center points of the 2 hood brackets (Part #5).
8. Screw the 4 toggle bolts (Part #9) into wall leaving the head of the
bolts approximately 6.4 mm (0.25 in) away from the wall surface.
WALL
6.4 mm
(0.25 in)
mOUNTING THE HOOD BRACKETS
1. Attach the 2 hood brackets (Part #5) to the back of the hood body
with 4 screws and washers (Part #10).
DAmPER INSTALLATION
The dampers are installed at the factory. If they have come loose dur-
ing shipping, the following is how to replace them. Caution: Edges are
sharp. Wear safety gloves. Insert one end of the damper into the hinge
slot at the top of the hood body. Gently bend the damper and carefully
insert the second end of the damper into the hinge slot. Be very careful
when installing the dampers. Applying to much force or not bending the
damper enough may damage or break the damper hinge ends.
Because of the weight and size of the range hood,
two or more people are needed to move and safely
install the range hood. Failure to properly lift range
hood could result in damage to the product or
personal injury. Hood may have very sharp edges.
Please wear protective gloves if it is necessary to
remove any parts for installation.
Part# 1
WARNING
PERSONAL INJURY HAZARD
Part# 5
Part# 10
13
Hide quick links:
Advertisement
Table of Contents
