Osburn Matrix Inbuilt Installation And Operation Manual page 42

Osburn Matrix Inbuilt Installation and Operation Manual
42 _ _____________________________________________________________________________
1. To reverse the door handle (E), remove the
spring pin (H), the 2 washer (I), and the
assembled balled latch (J) and the
cylindrical pin (K).
2. Unscrew the 2 bolts (F) that holds the
handle guide (G) in place. Remove the
spacers (B).
3. Unscrew the lock nut (R) first, and then the
shoulder screw (T) that holds the door
handle (E) and the washer (S) on the handle
guide (G).
4. Remove the door handle (E), rotate it a half
turn and reinstall it in the same location.
Put back the spacers (B).
5. Assemble the handle guide (G) along with
the washer (S) on the door handle (E) with
the shoulder screw (T) and the nut (R).
Make sure the parts are properly
assembled.
6. Secure the handle guide (G) with the 2 bolts
(F).
7. Reinstall the assembled cylindrical pin (K)
and balled latch (J), along with the 2 washer
(I) and secure with the spring pin (H).
To adjust the tightness of the door, see Section
5.1.2 Door adjustment.